Today's (small) Airball accomplishments:
* Fabricated and installed plastic backs for my display units;
* Ordered some RAM ball mounts to attach to these backs, for easy mounting in cockpits;
* Ordered 60mW 2.4 GHz XBee units and Taoglas adhesive antennas;
* Starting to learn Eagle PCB CAD.
The looming task now is to design a fixture for mounting the probe to a pole on top of a car to do some more or less controlled road testing at different alpha/beta values, and in so doing to also see how we're doing on reliability for the communications and for the spurious sensor board freeze.
https://www.amazon.com/gp/product/B0012TRIZI/
* Fabricated and installed plastic backs for my display units;
* Ordered some RAM ball mounts to attach to these backs, for easy mounting in cockpits;
* Ordered 60mW 2.4 GHz XBee units and Taoglas adhesive antennas;
* Starting to learn Eagle PCB CAD.
The looming task now is to design a fixture for mounting the probe to a pole on top of a car to do some more or less controlled road testing at different alpha/beta values, and in so doing to also see how we're doing on reliability for the communications and for the spurious sensor board freeze.
https://www.amazon.com/gp/product/B0012TRIZI/
No comments :
Post a Comment